Haas VMC CNC Milling Machine VF-2

• Year 1998
• Voltage 208/230
• Phase 3
• Hertz 50/60
• Travels: X 30″, Y 16″, Z 20″
• Spindle Motor 20HP
• Spindle Speed 7,500 RPM
• Spindle Nose to Table Top 4″ to 24″
• Spindle Taper CAT 40
• Tool Changer 20
• Machine Weight 8,000

Click Here For Updates on Machines & Equipment As They Become Available

The above specifications are to the best of our knowledge based on our research.  You may wish to confirm them with the factory.

We bought this from a manufacture we work with regularly.  It was used in regular production, however the electronics will need to be serviced.  An electrical board in the cabinet broke off in shipping to our warehouse.  The specs below are to the best of my knowledge and you may want to double check them.

Mori Seiki CNC Lathe Turning Center – Dual Turret
Year 1988
Between Centers 19.6″
Swing over cross slide 13.8″
Spindle Speed 35-3,500RPM
Hole Through Spindle: 3.1″
Bar Capacity 2.5″
No. of Tools: Upper 12, Lower 8
Spindle: A2-6
Horsepower (30 Min.): 30HP
Dia. of Quill in Tailstock: 3.3″
Tailstock Quill Taper #3MT
Equiped with:
Fanuc CNC Control
12 Station Upper Turret
8 Station Lower Turret
Live Tailstock
Chip Conveyor

      

Lagunmatic 310 CNC Mill 

• With Dynapath Delta 10 CNC controls
• Excellent condition
• Mfg — 1990
• Made in USA
• 2,705 hours
• 50″ x 10 ” table
• X, Y travels — 27″, 14″
• Knee travel — 16″
• Quill travel — 6″
• 7.5 hp spindle motor (230V, 3 phase)
• Number 40 taper
• Push-button power drawbar
• Variable spindle speeds — 55 to 4250 rpm (2 ranges)
• 4 3/8″ diameter hard-chromed quill
• Custom-built anodized splash guard
• Improved coolant system with large reservoir, manifolds for snap-lock nozzles
• Tooling sub-plate with tapped hole grid for easy workpiece clamping and setup
• Automatic spindle and way lubrication
• Dynapath Delta 10 CNC control
• 40-taper tooling included, see pictures
• Machine and tooling in excellent condition
• Machine is under power for inspection
• Covers removed for pictures and inspection, included in sale

• Spindle is bad in this machine (not sure if it’s both or just one spindle)
• Control Mazatrol T 32-4
• Chucks (2) 8″ Diameter
• Max Swing 15.3″
• Max Cutting Diameter 10.2″
• Distance Between Spindles 45.6″
• Spindle Bore 2″
• Speed up to 4000 RPM
• Turrets (2) 12 Position
• Gantry Loader

• Year 1996 & 1998 (1998 is for parts only)
• Mazatrol T Plus Control
• Chucks (2) 8″ Diameter
• Swing 12.6″
• Max Cutting Diameter 10″
• Distance Between Spindles 40.55″
• Spindle Bore 2″
• Speed to 5,000RPM
• Turrets (2) 12 Position
• Weight 13,200lbs
• Included Chip Conveyor

• Max Swing Over Bed 15.35″
• Bar Capacity 2″
• Turning Diameter 10.24″
• Spindle Nose A2-6
• Spindle Thru Hole 2.55″
• X Axis Travel 9.05″
• Z Axis Travel, Left/Right Turret 16.92″/19.09″
• Turret Positions 12 x 2
• Rapid Traverse Speed 944.88 IPM
• Swing 12.8″
• Distance Between Spindles 46.45″
• Turrets (2) 12 Position w/live milling
• Power 25hp
• Speed up to 3600 RPM
• Weight 18,920lbs
• Control Mazatrol EIA-TA CNC
• These are the specifications to the best of our knowledge.  Please research and check specifications to ensure vital details of the machine.

• Control: Mazatrol EIA-TA
• Chuck Size 6.5″ (2)
• Max Diameter of Bar Capacity 1.65″
• Distance Between Spindles 45.55″
• Spindle Bore 2″
• Spindle Nose A2-5
• Rapid Traverse Rates 945IPM
• X Axis Travel 7.87″
• Z Axis Travel 14.37
• Turret Index (single/full step) 0.4/1.2 Seconds
• Maximum Swing: 13.78″
• Turn Diameter: 9″
• Machining Length: 15″
• Bar Capacity: 1.65″
• Spindle Speed: upto 3600 RPM
• Main Motor: 15HP
• Turret Position: (2) 12 Position
• Machine Weight 15,400lbs
• Several available, Years from 1991 to 1998
• • These are the specifications to the best of our knowledge.  Please research and check specifications to ensure vital details of the machine.